Instructions for using weather resistant adhesive

1. Unsaturated structural adhesives and structural adhesives release volatile compounds during the curing process. Long term inhalation of high concentrations of volatile compounds is harmful to health. Therefore, good ventilation should be maintained in the workplace.

2. Before curing the weather resistant adhesive, reduce contact with eyes. If in contact with eyes, rinse with plenty of water and then check.

3. After curing, weather resistant adhesive will not release harmful substances and will not cause damage to the skin.

4. Before using weather resistant adhesive, users should first conduct compatibility and adhesion tests on the materials to confirm their compliance before proceeding with construction operations.

5. The company only guarantees whether the product meets the quality requirements.

The main technical indicators of structural adhesive weather resistant sealant include sag, extrudability, and surface drying time, which characterize the construction performance. The main indicators of weather resistant adhesive performance after curing are displacement ability and mass loss rate. The quality loss of weather resistant adhesive is equivalent to the thermal weight loss of structural adhesive, mainly examining the performance changes of weather resistant adhesive after long-term use. The higher the quality loss rate, the more severe the performance decline after long-term use. The main function of weather resistant sealant is to seal the joints between plates. Due to the frequent displacement of plates caused by temperature changes, deformation of the main structure, etc., the width of the joints will also change accordingly. This requires weather resistant adhesive to have a good ability to withstand joint displacement and not crack under long-term changes in joint width. This performance is called the displacement capacity of weather resistant adhesive, which is different from the "displacement bearing capacity" of structural adhesive.

Structural adhesive structural sealant is a single component, neutral curing, designed specifically for the bonding and assembly of glass structures in building curtain walls. Can be easily squeezed out for use under wide temperature conditions. By relying on moisture in the air to solidify into excellent, durable, high modulus, and high elasticity rubber. The product does not require a primer on glass and can produce superior adhesion.