Product Introduction

Aquarium-specific adhesive is a single-component, acid-cured, 100% silicone, high-performance sealant for bearing mechanical stresses and for interface seals that require rapid mechanical strength, such as the manufacture and installation of glass fish tanks that meet DIN32 622 requirements. This product is also suitable for glass assembly and industrial uses such as silo equipment and container manufacturing; After full curing, it has good flexibility from -40℃ to 150℃, short surface drying time and low curing shrinkage.

Instructions for use

● Not suitable for all seeping grease, plasticizer or solvent material surface.

● For surfaces that are difficult to attach, use primer.

● Keep away from fire and avoid contact with children.

● Before using this product, carry out compatibility and bonding test on the contact material, and confirm the qualification before construction operation.

Precautions

It should be stored in a cool, dry and ventilated place below 27°C. The storage period is 12 months.

After this period, it can be used only after passing the inspection.

Transportation: This product is transported as non-dangerous goods.

Product mark:GB/T 14683-2017-G-20HM   ASTM C 920;class 25